Siemens SCALANCE W1750D CLI - Terminal-Access

CLI Commands
4.17 T
SCALANCE W1750D CLI
634 Function Manual, 03/2019, C79000-G8976-C452-04
no…
Command/Parameter
Description
telnet-server
Enables Telnet access to the SCALANCE W CLI.
no…
Removes the configuration
Usage Guidelines
Use this command to enable Telnet access to the SCALANCE W CLI.
Example
The following example enables Telnet access to the AP:
(scalance)(config)# telnet-server
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.17.3 terminal-access
Description
This command enables SSH access to SCALANCE W CLI.
Syntax
terminal-access
no…
Command/Parameter
Description
terminal-access
Enables terminal access to the SCALANCE W CLI.
no…
Removes the configuration.
Usage Guidelines
Use this command to enable SSH access to the SCALANCE W CLI.