Siemens SCALANCE W1750D CLI - Opendns

CLI Commands
4.13 O
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
209
4.13 O
4.13.1 opendns
Description
This command configures OpenDNS credentials for filtering content and to create Internet
access policies that allow or deny user access to websites based on website categories and
security ratings.
Syntax
opendns <user> <password>
no...
Parameter
Description
opendns
Configures user credentials to enable access to OpenDNS to provide
enterprise-level content filtering.
<user>
Configures user name to access OpenDNS.
<password>
Configures password to access OpenDNS.
no…
Removes the configuration.
Usage Guidelines
Use this command to configure OpenDNS credentials to allow Scalance W to filter content at
the enterprise-level.
Example
The following example configures OpenDNS credentials:
(scalance)(config)# opendns <username <password>
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode