Siemens SCALANCE W1750D CLI - Show Ap-Alert

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
393
Usage Guidelines
Use this command to view information server and CA certificates used for validating the
authentication server to which AP authenticates as a 802.1X supplicant.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.86 show ap-alert
Description
This command displays all the alerts received for the specified APs.
Syntax
show ap-alert <count>
Usage Guidelines
Use this command to check all the alerts received for all the APs specified.
Example
The following example shows the output of show ap-alert command.
AP Alerts
---------
Timestamp Type MAC Address IP Address Description
--------- ---- ----------- ---------- -----------
The output of this command includes the following information:
Column
Description
Timestamp
Indicates the time at which the alert was received.
Type
Indicates the type of alert received for the AP.
MAC Address
Indicates the MAC address of the AP clients.
IP Address
Indicates the IP address associated with the AP.
Description
Displays a brief description of the alert received.