Siemens SCALANCE W1750D CLI - Ssh; Subscription-Ap

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
627
4.16.239 ssh
Description
This command configures the ciphers for SSH connection to an AP.
Syntax
ssh
disable-ciphers {aes-cbc | aes-ctr}
no...
Parameter
Description
disable-ciphers
Displays the log output from the backup VPN tunnel.
aes-cbc
Disables AES-CBC authentication for SSH. This parameter ena-
bles the AES-CTR encryption.
aes-ctr
Disables AES-CTR authentication for SSH. This parameter ena-
bles the AES-CBC encryption.
no
Enables the disabled cipher encryptions on the SSH server.
Usage Guidelines
The SSH server supports AES-CBC and AEC-CTR ciphers. Use this command if you want
to disable one of the ciphers. This configuration is applicable only to non-FIPS builds.
Example
The following command enables AES-CBC and disables AES-CTR on the SSH server:
(scalance)(config) #ssh disable-ciphers aes-ctr
The following command enables the disabled cipher encryptions on the SSH server:
(scalance)(config) #no ssh disable-ciphers
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.240 subscription-ap
Description
This command configures the subscription status for an AP.