Siemens SCALANCE W1750D CLI - Show Log Drive; Show Log Kernel

CLI Commands
4.16 S
SCALANCE W1750D CLI
532 Function Manual, 03/2019, C79000-G8976-C452-04
Syntax
show log debug{count}
Parameter
Description
<count>
Starts displaying the log output from the specified number of lines from the
end of the log.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.159 show log drive
Description
This command displays the status of drivers configured on the AP.
Syntax
show log driver <count>
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.160 show log kernel
Description
This command shows AP’s kernel logs.
Syntax
show log kernel