Siemens SCALANCE W1750D CLI - Show Fiewall

CLI Commands
4.16 S
SCALANCE W1750D CLI
500 Function Manual, 03/2019, C79000-G8976-C452-04
Active Faults
-------------
Time Number Description
---- ------ -----------
Total number of entries in the queue :0
The following example shows the output for the
show fault history command:
Cleared Faults
--------------
Time Number Cleared By Description
---- ------ ---------- -----------
Total number of entries in the queue :0
The output of these commands provide the following information:
Parameter
Description
Timestamp
Displays the system time at which an event occurs.
Number
Indicates the sequence
Cleared By
Displays the module which cleared this fault.
Description
Provides a short description of the event details.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.134 show fiewall
Description
This command displays the status of firewall settings of an AP.
Syntax
show firewall
Usage Guidelines
Use this command to view the firewall configuration details of the AP.