Siemens SCALANCE W1750D CLI - Show Wispr Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
619
Column
Description
Native VLAN
Indicates the values assigned for Native VLAN. A VLAN that does not have
a VLAN ID tag in the frames is referred to as Native VLAN.
Admin Status
Indicates the status of admin port.
Role
Indicates the role assigned to the wired profile users.
Speed
Indicates the speed of wired client traffic.
duplex
Indicates if the client traffic duplexing full, half, or automatically assigned
based on the capabilities of the client, the AP, and the cable.
poe
Indicates if PoE is enabled.
In Use
Indicates if the wired profile is in use.
Authentication Meth-
od
Indicates the authentication method configured for the wired profile.
Trusted
Indicates if a trusted port is supported in an AP.
Port
Indicates the port number to which a wired profile is assigned.
Profile
Indicates the name of wired profile assigned to a wired port.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.232 show wispr config
Description
This command displays the WISPr authentication parameters configured on an AP.
Syntax
show wispr config
Usage Guidelines
Use this command to view the WISPr configuration details for an AP.
Example
The following example shows the output of show wispr config command:
WISPr ISO Country Code :91
WISPr E.164 Country Code :IN
WISPr E.164 Area Code :80
WISPr SSID :Network1