Siemens SCALANCE W1750D CLI - Vlan

CLI Commands
4.19 V
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
651
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.19.3 vlan
Description
This command configures a VLAN mapping for an SSID profile.
Syntax
vlan {<vlan_name> [<vlan id>]}
no…
Parameter
Description
Range
<vlan_name>
Configures the AP's VLAN name.
1-32
vlan id
Configures the AP's VLAN ID.
no...
Removes the configuration.
Usage Guidelines
Use this command to define the mapping of the VLAN name and VLAN ID. VLAN names are
not case sensitive.
Example
The following example configures VLAN ID mapping to a specific VLAN name.
(scalance)(config)# vlan myvlan 30
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode