Siemens SCALANCE W1750D CLI - Ap1 X-Peap-User

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
47
Usage Guidelines
Use this command to configure 802.1X authentication on uplink ports of an AP, so that the
APs can authenticate as 802.1X supplicant against the wired ports.
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.1.23 ap1x-peap-user
Description
This command configures the user name and password variables to set the AP as a 802.1X
supplicant to authenticate against the wired ports.
Syntax
ap1x-peap-user <ap1xuser> <password>
no…
Parameter
Description
<ap1xuser>
Configures the user name variable for AP to authenticate against the
wired uplink ports with 802.1X authentication enabled.
<password>
Configures the password variable for AP to authenticate against the
wired uplink ports with 802.1X authentication enabled.
no…
Removes the configuration.
Usage Guidelines
Use this command to configure and store the user name and password variables in AP flash.
This configuration is required for AP to authenticate as 802.1X supplicant against the wired
ports that are configured to use 802.1X protocols for authenticating clients.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode