Siemens SCALANCE W1750D CLI - Show Ap Pmkcache

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
389
MMS N/A N/A 30 disable 01:0c:cc:00:00:00 N/A disable N/A N/A N/A
Aeroscout N/A N/A N/A disable 00:00:00:00:00:00 N/A disable N/A N/A N/A
RTLS N/A N/A 30 disable 01:18:8e:00:00:00 N/A disable N/A N/A N/A
The outputs of the AP monitor command displays the following:
● Active laser beam sources for the AP.
● List of APs monitored by the AP.
● ARP cache details for the AP.
● List of clients monitored by the AP.
● Containment details for the AP.
● List of potential APs for the AP.
● List of potential clients for the AP.
● Information about the potential wireless devices.
● Scanned information for the AP.
● Configuration and status of monitor information of the AP.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.82 show ap pmkcache
Description
This command displays the PMK cache table for clients associated with the AP.
Syntax
show ap pmkcache
Usage Guidelines
Use this command to view PMK cache table contents for the clients associated with an AP.
Example
The following example shows the output of show ap pmkcache command.
PMK Cache Table
---------------