Siemens SCALANCE W1750D CLI - Show Delta-Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
472 Function Manual, 03/2019, C79000-G8976-C452-04
7 seconds ago Success
7 seconds ago Success
7 seconds ago Success
Note
DHCP profile name is None for the Master AP update sent.
The output of this command provides the following information:
Command/Parameter
Description
Host Name
Displays the hostname of the DDNS client
Domain Name Displays the domain name mapped to the DDNS
client.
IP Address
Denotes the IP address of the DDNS client.
DHCP profile name
Denotes the profile name of the DHCP server.
Success Count Indicates the number of times the update sent to
the DNS server succeeded.
Failure Count Indicates the number of times the update sent to
the DNS server got failed.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.117 show delta-config
Description
This command displays the difference between the current configuration in the current CLI
session and the configuration that is saved on the AP
Syntax
show delta-config [<cfgid>]
Usage Guidelines
Use this command to view the difference between the current configuration information
stored in the AP flash memory and the configuration information saved in the AP memory.