Siemens SCALANCE W1750D CLI - Show Vpn

CLI Commands
4.16 S
SCALANCE W1750D CLI
608 Function Manual, 03/2019, C79000-G8976-C452-04
Example
The following example shows the output of the show version command:
SIEMENS.
SIEOS (MODEL: SCALANCE-W1750D-2IA-RJ45), Version 8.4.0.0
Website: http://www.siemens.com/iwlan
All Rights Reserved (c) 1996-2018, Siemens AG.
Compiled on 2018-12-13 at 14:56:13 UTC (build 68230) by p4build
FIPS Mode :disabled
AP uptime is 2 days 21 hours 29 minutes 36 seconds
Reboot Time and Cause: unknown
The output of this command provides the following information:
Parameter
Description
Version
Indicates the version of AP software.
Reboot Time and Cause
Indicates the reason for which the AP was last rebooted and the reboot
time.
Model
Indicates the AP model.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.226 show vpn
Description
This command displays the status and configuration details for VPN-enabled APs.
Syntax
show vpn {config|status|tunnels}
Parameter
Description
config
Displays configuration details for the VPN-enabled APs.
status
Displays the status of the VPN connections enabled on an AP.
tunnels
Displays the AP-VPN retry counter statistics.