Siemens SCALANCE W1750D CLI - Show Ap Debug Tacas-Statistics

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
367
Syntax
show ap debug system-status
Usage Guidelines
Use this command under the guidance of technical support to troubleshoot network issues.
The output of this command displays the following types of information if any for the selected
AP:
• Bootstrap information • Per-radio statistics • Ethernet duplex/speed set-
tings
• Descriptor Usage • Encryption statistics • Tunnel heartbeat stats
• Interface counters • AP uptime • Boot version
• MTU discovery • memory usage • LMS information
• ARP cache • Kernel slab statistics • Power status
• Route table • Interrupts • CPU type
• Interface Information • Crash Information • CPU usage statistics
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.74 show ap debug tacas-statistics
Description
This command displays the TACACS statistics for the authentication servers configured on
an AP.
Syntax
show ap debug tacacs-statistics
Usage Guidelines
Use this command to view the authentication server details.