Siemens SCALANCE W1750D CLI - Show Opendns

CLI Commands
4.16 S
SCALANCE W1750D CLI
552 Function Manual, 03/2019, C79000-G8976-C452-04
Action:<out:controller overwrite-flag:4 >
Flow: <Add at Wed Jun 27 09:47:56 2018> <bytes:0, pkts:0, idletmo:0, hardtmo:3000
last:0>
<aceidx:29, actidx:14>, Match< 17, 514><cookie : 1099511627867>, Action:<out:normal
out:controller >
The following example displays the output of the
show openflow syslog-statistics command:
Last SYSLOG feed flush timestamp: 00:00:00
Last SYSLOG data flush count: 0
Last SYSLOG data flush size: 0
SYSLOG ring buffer size threshold limit: 16384 bytes
SYSLOG Total packet_ins 0
Total Syslog packets generated 4
Syslog IP : 15.184.8.6, Syslog Level : warn
Current SYSLOG data count: 4
Current SYSLOG data size: 839 bytes
Current SYSLOG free space: 15545 bytes
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.185 show opendns
Description
This command displays the open DNS configuration details for an AP.
Syntax
show opendns [support]
Parameter
Description
support
Displays if the OpenDNS credentials if the OpenDNS service is configured
on the AP.
Usage Guidelines
Use this command to view open DNS configuration details. The OpenDNS credentials are
used by Scalance W to access OpenDNS to provide enterprise-level content filtering.