Siemens SCALANCE W1750D CLI - Wlan Access-Rule

CLI Commands
4.20 W
SCALANCE W1750D CLI
696 Function Manual, 03/2019, C79000-G8976-C452-04
(scalance)(Auth Server <RADIUS1>)# key SecretKey
(scalance)(Auth Server <RADIUS1>)# port 1812
(scalance)(Auth Server <RADIUS1>)# acctport 1813
(scalance)(Auth Server <RADIUS1>)# rfc3576
(scalance)(Auth Server <RADIUS1>)# cppm username admin password eTIPS123
(scalance)(Auth Server <RADIUS1>)# rfc5997 auth-only
(scalance)(Auth Server <RADIUS1>)# no nas-id
(scalance)(Auth Server <RADIUS1>)# no nas-ip
(scalance)(Auth Server <RADIUS1>)# drp-ip 192.0.2.11 255.255.255.255 vlan 200 gateway
192.0.2.15
(scalance)(Auth Server <RADIUS1>)# timeout 10
(scalance)(Auth Server <RADIUS1>)# retry-count 3
(scalance)(Auth Server <RADIUS1>)# service-type-framed-user cp
(scalance)(Auth Server <RADIUS1>)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode and authentication server profile sub- mode.
4.20.7 wlan access-rule
Description
This command configures access rules for WLAN SSID or wired profile.
Syntax
wlan access-rule <name>
bandwidth-limit {downstream <kbps>| upstream <kbps>| peruser { downstream <kbps>|
upstream<kbps>}}
calea
captive-portal {external [profile <name>]|internal}
dpi-error-page-url <idx>
index <index>
no