Siemens SCALANCE W1750D CLI - Mgmt-Auth-Server-Load-Balancing

CLI Commands
4.11 M
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
203
Usage Guidelines
Use this command to configure a management authentication server for administrator users
of a Virtual Controller.
Example
The following example configures an authentication server for the management user
interface:
(scalance)(config)# mgmt-auth-server server1
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.11.9 mgmt-auth-server-load-balancing
Description
This command enables load balancing when two authentication servers are configured for
management user authentication.
Syntax
mgmt-auth-server-load-balancing
no…
Parameter
Description
mgmt-auth-server-
load-balancing
Enables load balancing between the primary and the backup authentica-
tion servers
no…
Removes the configuration.
Usage Guidelines
Use this command to enable load-balancing when two servers are configured.
Example
The following example enables load-balancing between two authentication servers.
(scalance)(config)# mgmt-auth-server-load-balancing