Siemens SCALANCE W1750D CLI - Show Ids-Detection Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
507
valid 0
interfering 1
rogue 2
dos-attack 3
unknown 4
known-interfering 5
suspect-rogue 6
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.139 show ids-detection config
Description
This command displays the list of intrusion detection policies configured on an AP.
Syntax
show ids-detection config
Usage Guidelines
Use this command to view a list of intrusion detection policies enabled for an AP.
Example
The following output is displayed for the show ids-detection command:
infrastructure detection level : off
---------------------------------------------------
Policies
Status
Low
Medium
High
--------
------
---
------
----
detect-ap-spoofing
disable
enable
enable
enable
detect-windows-bridge
disable
enable
enable
enable
signature-deauth-broadcast
disable
enable
enable
enable
signature-deassociation-broadcast
disable
enable
enable
enable
detect-adhoc-using-valid-ssid
enable
disable
enable
enable
detect-malformed-large-duration
enable
disable
enable
enable
detect-ap-impersonation
enable
disable
disable
enable
detect-adhoc-network
enable
disable
disable
enable
detect-valid-ssid-misuse
enable
disable
disable
enable
detect-wireless-bridge
disable
disable
disable
enable