Siemens SCALANCE W1750D CLI - Show Clarity

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
421
4.16.104 show clarity
Description
This command displays the status of the clarity configuration parameters on the AP.
Syntax
show clarity
config
history {auth|dhcp|dns}
Parameter
Description
config
Displays the inline monitoring statistics of the clarity configuration parameters.
history
Displays the history of the clarity configuration parameters.
auth
Displays the history of the authentication statistics generated by inline monitoring.
dhcp
Displays the history of the DHCP related statistics generated by inline monitoring.
dns
Displays the history of the DNS statistics generated by inline monitoring.
Usage Guidelines
Use this command to view the status of the inline monitoring statistics and the history of the
configured APs.
Example
The following example shows the output of show clarity config command:
Clarity config
--------------
Parameter
Value
---------
-----
inline Sta stats
enabled
inline Auth stats
enabled
inline DHCP stats
enabled
inline DNS stats
enabled
The following example shows the output of show clarity history auth command:
Clarity Auth Trace Buffer
-------------------------
Jan 1 15:47:33 DOT1X_EVENT
AUTHSERVER TIMEOUT
00:db:df:0a:41:6e ac:a3:1e:c9:32:31 192.168.0.118 3 4
Jan 1 15:47:59 DOT1X_EVENT
AUTHSERVER TIMEOUT
00:db:df: 0a:41:6e ac:a3:1e:c9:32:31 192.168.0.118
3
6
Jan 1 16:05:03 DOT1X_EVENT
AUTHSERVER TIMEOUT
00:db:df:0a:41:6e ac:a3:1e:c9:32:31 192.168.0.118 3 6
Jun 21 09:25:27
DOT1X_EVENT
AUTHSERVER TIMEOUT
00:db:df:0a:41:6e ac:a3:1e:c9:32:21 192.168.0.118 3
13