Siemens SCALANCE W1750D CLI - Reset Drt; Restrict-Corp-Access

CLI Commands
4.15 R
SCALANCE W1750D CLI
224 Function Manual, 03/2019, C79000-G8976-C452-04
4.15.4 reset drt
Description
his command resets the DRT version on an AP.
Syntax
reset drt
Usage Guidelines
Use this command to clear the upgraded DRT file and enable the AP cluster to use the
default DRT file.
Example
The following command shows how to reset the DRT version:
(scalance)# reset drt
The AP returns the following message if the AP is using the default DRT version:
DRT is already in default status.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.15.5 restrict-corp-access
Description
This command configures restricted access to the corporate network.
Syntax
restrict-corp-access
no…
Parameter
Description
no…
Removes the configuration.