Siemens SCALANCE W1750D CLI - Show Radio Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
559
The output of this command provides the following information:
Parameter
Description
Proxy server
Displays the IP address of the HTTP proxy.
Proxy port
Displays the port number configured for the HTTP proxy.
Exceptions
Displays the IP address of the hosts for which HTTP proxy configuration is
not applied.
Proxy username
Displays the user name set to authenticate the proxy server.
Proxy password
Displays the password set to authenticate the proxy server in the encrypted
format.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.191 show radio config
Description
This command displays the 2.4 GHz and 5 GHz radio configuration details for an AP.
Syntax
show radio config
Usage Guidelines
Use this command to view the 2.4 GHz and 5 GHz radio configuration details for an AP.
Example
The following example shows the output of show radio config command:
(scalance)# show radio config
Legacy Mode:enable
Beacon Interval:100
802.11d/802.11h:enable
Interference Immunity Level:2
Channel Switch Announcement Count:0
MAX Distance:600