Siemens SCALANCE W1750D CLI - Show Ap Debug Stm-Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
365
4.16.71 show ap debug stm-config
Description
This command displays the AP STM configuration information.
Syntax
show ap debug stm-config
Usage Guidelines
Use this command to view the details of STM configuration.
Example
The following output is displayed for the show ap debug stm-config command:
SSID:
Server Load Balancing:disable
MAC Authentication:disable
RADIUS Accounting:disable
SSID: wired eth1
Server Load Balancing:disable
MAC Authentication:disable
RADIUS Accounting:disable
SSID:wireless-local-nw
Server Load Balancing:disable
MAC Authentication:disable
RADIUS Accounting:disable
Associated RADIUS
Server:InternalServer
The output of this command provides the following information for each SSID:
Column
Description
SSID
Indicates the name of the SSID.
Server Load Balancing Indicates if server load balancing is enabled.
MAC Authentication
Indicates if MAC authentication is enabled.
RADIUS Accounting
Indicates if RADIUS accounting is enabled.
Associated RADIUS Serv-
er
Displays the authentication server details configured for an SSID.