Siemens SCALANCE W1750D CLI - Show Log Wireless; Show Memory

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
545
2017-05-02 06:49:53 tunnel_preempt_config(3006): config preemption option to none-
preempt 2017-05-02 06:49:53 tunnel_preempt_config(3031): Warning!!! preempt have same
configure, return.
2017-05-02
06:49:53
cli vpn factory(2303): monitor frequency configure here.
2017-05-02
06:49:53
tunnel_send_pkt_freq_config(3255): config send icmp packet freq 5
for
monitor tunnel device.
2017-05-02
06:49:53
tunnel psk config(3124): config cert
2017-05-02
06:49:53
Manual GRE primary endpoint 0.0.0.0
2017-05-02
06:49:55
tunnel sysctl set lmsip: Set LMSIP=172.16.0.254
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.179 show log wireless
Description
This command shows wireless logs of the AP.
Syntax
show log wireless [<count>]
Parameter
Description
<count>
Starts displaying the log output from the specified number of lines from the
end of the log.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.180 show memory
Description
Displays the information about memory utilization for an AP.