Siemens SCALANCE W1750D CLI - Show Ap Mesh Cluster

CLI Commands
4.16 S
SCALANCE W1750D CLI
288 Function Manual, 03/2019, C79000-G8976-C452-04
The output of this command displays details such as the version, serial number, subject,
issue date, expiry date, type of encryption, and RSA key information of the CA certificates
uploaded on the AP.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.24 show ap mesh cluster
Description
This command shows the saved mesh configurations, status, and topology of APs
Syntax
show ap mesh cluster
configuration
status
topology
Example
The following example shows the output of show ap mesh cluster configuration command:
Mesh cluster name :mesh_clusterl
Mesh cluster key :Manual
The following example shows the output of
show ap mesh cluster status command:
Mesh cluster :Enabled
Mesh cluster name :mesh_clusterl
Mesh role :Mesh Portal
The following example shows the output of
show ap mesh cluster topology command:
Mesh Cluster name: mesh_clusterl
Name
AP Type
Mesh Role
Parent
IP Address
Path Cost
Node Cost
Link Cost
----
-------
--------
------
----------
--------
--------
--------
a8:bd:27:c9:84
:3a
AP-207
Portal (AC)
-
192.168.1.
60
3
0
0
HopCount
Rate
Tx/Rx
RSSI
Last Up-
date
Uplink Age
Children
--------
---------
-
----
----------
----------
0
-
0
1m:58s
6m:1s
0