Siemens SCALANCE W1750D CLI - Hash-Mgmt-Password; Hash-Mgmt-User

CLI Commands
4.8 H
SCALANCE W1750D CLI
118 Function Manual, 03/2019, C79000-G8976-C452-04
4.8 H
4.8.1 hash-mgmt-password
Description
This command enables hashing of the management user password.
Syntax
hash-mgmt-password
Usage Guidelines
Use this command to enable hashing of a management user password. When this command
is configured, the
mgmt-user command will no longer be available to add, modify, or remove
management users. You will be redirected to the
hash-mgmt-user command to add, modify,
or remove management users.
Example
The following example enables password hashing for management users:
(scalance)(config) # hash-mgmt-password
(scalance)(config) # end
(scalance) # commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.8.2 hash-mgmt-user
Description
This command is used to configure management users by using clear text or hash as the
password input.