Siemens SCALANCE W1750D CLI - Show Dhcpc-Opts

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
477
Parameter
Description
Netmask
Displays the subnet mask.
DNS Server Displays the DNS server IP address.
Domain Name
Displays the domain name configured for the DHCP scope.
Default router Displays the IP address of the default router.
lease-time
Displays the lease-time configured for the DHCP clients.
IP Address Range Displays the range of IP addresses configured for the distributed DHCP
scopes.
client-count <number>
Displays the number of clients allowed per DHCP branch.
DHCP Option
Displays the DHCP option if configured.
Reserve First and
Reserve Last
Displays the first few and the last few IP addresses reserved in the
Branch ID
Displays the DHCP branch ID.
Branch Netmask
Displays the branch subnet mask.
Branch Router
Displays the IP address if the branch router.
Exclude IP address Displays the excluded IP address. The value displayed in this determines
the exclusion range of the subnet. Based on the size of the subnet, the IP
addresses that come before or after the IP address value specified in this
field are excluded.
DHCP Relay Displays the DHCP relay information that enables the APs to intercept the
broadcast packets and relay DHCP requests directly to corporate network.
DHCP Relay Server Displays the IP address of the corporate DHCP server for the DHCP re-
quest relay.
Split Tunnel
Indicates if the split-tunnel function is enabled or disabled.
DHCP Host Indicates the DHCP host name if configured.
DNS cache
Indicates if DNS caching is enabled or disabled.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.121 show dhcpc-opts
Description
This command displays the DHCP options configured on an AP.
Syntax
show dhcpc-opts