Siemens SCALANCE W1750D CLI - Airgroup

CLI Commands
4.1 A
SCALANCE W1750D CLI
34 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.1.9 airgroup
Description
This command configures the AirGroup settings on an AP.
Syntax
airgroup cppm
cppm-query-interval
cppm-server disable
enable
enable-guest-multicast multi-swarm
no
Parameter
Description
Range
Default
cppm
Enforces the discovery of the ClearPass
Policy Manager registered devices. When
enabled, only devices registered with
ClearPass PolicyManager will be discov-
ered by Bonjour® or DLNA devices, based
on the ClearPass Policy Manager policy
configured.
— Enabled
cppm-query-interval
<interval>
Configures a time interval at which Scal-
ance W sends a query to ClearPass Policy
Manager for mapping the access privileges
of each device to the available services.
1-24 10 hours
cppm-server <server-name>
Configures the ClearPass Policy Manager
server information for AirGroup policy.
— —
disable
Disables the AirGroup feature.
—
—
enable [dlna-only| mdns-
only]
Enables the mDNS or DLNA or both.
When
dlna-only
command is executed with
enable
, the DLNA support is enabled for
AirGroup enabled devices.
When
mdns-only
command is executed
with
enable
, the Bonjour support is enabled
for AirGroup enabled devices.
— —