Siemens SCALANCE W1750D CLI - Mgmt-Auth-Server-Local-Backup

CLI Commands
4.11 M
SCALANCE W1750D CLI
204 Function Manual, 03/2019, C79000-G8976-C452-04
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.11.10 mgmt-auth-server-local-backup
Description
Configures a secondary internal authentication server that will validate the management
interface user credentials at runtime.
Syntax
mgmt-auth-server-local-backup
no…
Parameter
Description
mgmt-auth-server-
local-backup
Configures a backup internal server for management user authentication.
When enabled, the authentication switches to Internal if there is no
response from the RADIUS server (RADIUS server timeout).
no…
Removes the configuration.
Usage Guidelines
Use this command to configure a backup authentication server for the Virtual Controller
management interface.
Example
The following example configures a backup internal authentication server:
(scalance)(config)# mgmt-auth-server-local-backup
(scalance)(config)# end
(scalance)# commit apply