Siemens SCALANCE W1750D CLI - Ip Dhcp Pool

CLI Commands
4.9 I
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
185
(scalance)(DHCP Profile <profile-name>)# dns-server <name>
(scalance)(DHCP Profile <profile-name>)# dynamic-dns key <algo-
name:keyname:keystring> (scalance)(DHCP Profile <profile-name>)# domain-name <domain-
name>
(scalance)(DHCP Profile <profile-name>)# lease-time <seconds>
(scalance)(DHCP Profile <profile-name>)# ip-range <start-IP> <end-IP>
(scalance)(DHCP Profile <profile-name>)# reserve {first | last} <count>
(scalance)(DHCP Profile <profile-name>)# option <type> <value>
(scalance)(DHCP Profile <profile-name>)# end
(scalance)# commit apply
To configure VLAN in a Local DHCP profile:
(scalance)(config)# ip dhcp <profile-name>
(scalance)(DHCP Profile <profile-name>)# vlan-ip <VLAN_IP> mask <VLAN mask>
(scalance)(DHCP Profile <profile-name>)# end
(scalance)# commit apply
To configure a default router in a Local DHCP profile:
(scalance)(config)# ip dhcp <profile-name>
(scalance)(DHCP Profile <profile-name>)# default-router <default_router>
(scalance)(DHCP Profile <profile-name>)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and IP DHCP profile configu-
ration sub- mode.
4.9.11 ip dhcp pool
Description
This command configures a DHCP pool on the Virtual Controller.
Syntax
ip dhcp pool
dns-cache
dns-server <IP-address>