Siemens SCALANCE W1750D CLI - Version; Virtual-Controller

CLI Commands
4.19 V
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
649
4.19 V
4.19.1 version
Description
This command configures a version number for the AP.
Syntax
version <version-number>
Parameter
Description
version <version-
number>
Assigns a version number for the AP.
Usage Guidelines
Use this command to configure a version number for the AP.
Example
The following example configures a version number for the AP
(scalance)(config)# version 2
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.19.2 virtual-controller
Description
This command configures the virtual controller settings such as country code and VC key,
and network parameters such as IPv4 or IPv6 addresses, VLAN, and DNS IP address.