Siemens SCALANCE W1750D CLI - Show Uplink

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
599
f0:5c:19:cf:aa:f2 192.168.16.175 No Hercules image-ok From Seed
Auto reboot :enable
Use external URL :disable
Master wait Time :0 secs 0 count
Switch Partition :enable
Upgrade in process :No
UAP convert process :No
The output of this command provides the following information:
Parameter
Description
Mac
Shows the MAC address of the AP.
IP Address
Shows the IP address of the AP.
AP Class
Indicates the AP class.
Status
Indicate the current status of the image upgrade.
Image Info
Indicates the source of image.
Error Detail
Displays errors generated when an upgrade fails.
Auto Reboot
Indicates if automatic rebooting of AP is enabled on a successful upgrade.
Use External URL
Indicates if an external URL can be used for loading an image file.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.219 show uplink
Description
This command displays uplink configuration details and status of for an AP.
Syntax
show uplink {config|stats}
Parameter
Description
show uplink config
Displays the uplink interface configuration details for an AP.
show uplink stats
Displays the aggregate uplink statistics for an AP.
Usage Guidelines
Use this command to view the information about uplink status and configuration for an AP.