Siemens SCALANCE W1750D CLI - Show Ap Client-Probe-Report

CLI Commands
4.16 S
SCALANCE W1750D CLI
298 Function Manual, 03/2019, C79000-G8976-C452-04
a4:4e:31:97:da:74 0 9c:1c:12:3a:e9:1
0
-
- 42 40- 0 - -
Dynamic Load Balanc-
ing
-
2h:11m:34s
-
34
48-
19
00:15:00:5b:72:1c 1 9c:1c:12:3a:e9:6
0
- - 35 6 - - -
Stricky Client
-
1h:29m:37s
-
24
5
-
5a:12:00:00:00:11 0 9c:1c:12:3a:e6:7
0
- - 35 40- 9 - -
Dynamic Load Balanc-
ing
- 1h:9m:41s
-
15
44+
9
Total 6 Records
The output of this command displays client match trigger records with details such as station
MAC, target AP MAC, trigger condition and so on.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.32 show ap client-probe-report
Description
This command displays the client probe report for an AP.
Syntax
show ap client-probe-report [<radio>]
Parameter
Description
<radio>
Allows you to filter the output based the ID number of the radio (for ex-
ample, 0 or 1).
Usage Guidelines
Use this command to view a probe report for the clients associated with an AP.
Example
The following example shows the output of the show ap client-probe-report command.
AP Client Probe Report for Wifi0 (5G)
-------------------------------------
MAC
RSSI
In Swarm
Flags
Matched
Received
---
----
--------
-----
-------
--------
00:27:10:a9:98:60
12
No
4
-
1m:5s
60:f8:1d:ad:7f:f0
18
No
N
-
4s
24:77:03:8f:78:30
24
No
4
-
40s