Siemens SCALANCE W1750D CLI - Blacklist-Client; Blacklist-Time

CLI Commands
4.2 B
SCALANCE W1750D CLI
60 Function Manual, 03/2019, C79000-G8976-C452-04
4.2.2 blacklist-client
Description
This command allows you to manually blacklist the clients by using MAC addresses of the
clients.
Syntax
blacklist-client <MAC-address>
no…
Parameter
Description
<MAC-address>
Adds the MAC address of the client to the blacklist.
no…
Removes the specified configuration parameter.
Usage Guidelines
Use this command to blacklist the MAC addresses of clients.
Example
The following command blacklists an AP client:
(scalance)(config)# blacklist-client 01:23:45:67:89:AB
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.2.3 blacklist-time
Description
This command sets the duration in seconds for which the clients can be blacklisted due to an
ACL rule trigger.