Siemens SCALANCE W1750D CLI - Mtu

CLI Commands
4.11 M
SCALANCE W1750D CLI
206 Function Manual, 03/2019, C79000-G8976-C452-04
4.11.12 mtu
Description
This command configures the MTU size for the uplink interfaces.
Syntax
mtu <size>
no…
Parameter
Description
mtu <size>
Configures MTU size.
no…
Removes the configuration.
Usage Guidelines
Use this command to configures the MTU size for tunnel and br0 interfaces, and uplink
interfaces such as 3G or 4G. The configured MTU size is applied when the uplink changes.
Example
The following example sets the MTU size to 1200 bytes:
(scalance)(config)# mtu <1200>
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode