Siemens SCALANCE W1750D CLI - Show Ap Debug Client-Stats

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
331
Associated:0, Threshold:MAX
Leaving:0, Coming:0
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.52 show ap debug client-stats
Description
This command displays detailed statistics about an AP client.
Syntax
show ap debug client-stats {<mac>} | {<bssid>}
Parameter
Description
<mac>
Displays data based on the client MAC address.
<bssid>
Displays data based on the client's BSSID.
Usage Guidelines
Use this command to view information about an AP client.
Example
The following example displays the output of the show ap debug client-stats <mac> <bssid>
command. displays statistics for packets received from and transmitted to the specified
client:
Parameter
Value
----------------
General Per-radio Statistics
Last TX Antenna
0
Last RX Antenna
0
----------------
Transmit Specific Statistics
Tx Frames Rcvd
948
Tx Frames Dropped
200
Tx Frames Transmitted
948
Tx Bytes Rcvd
0
Tx Bytes Transmitted
287317
Tx Time Frames Rcvd
349004
Tx Time Frames Dropped
15376
Tx Time Frames Transmitted
333628
Tx PS Unicast
0
Tx Success With Retry
88
Tx Multiple Retries
0
Tx Mgmt Frames
236