Siemens SCALANCE W1750D CLI - Show Ap Debug Airwave-Data-Sent

CLI Commands
4.16 S
SCALANCE W1750D CLI
312 Function Manual, 03/2019, C79000-G8976-C452-04
Usage Guidelines
Use this command to view if any configuration information is received from the AirWave
server.
Example
The following example shows the output of the show ap debug airwave-config-received
command:
show ap debug airwave-config-received
No configuration received from AirWave yet
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.36 show ap debug airwave-data-sent
Description
This command displays information about data exchange between the AirWave server and
the AP.
Syntax
show ap debug airwave-data-sent
Usage Guidelines
Use this command to view information about the data sent to the AirWave server.
Example
The following example shows the output of the show ap debug airwave-data-sent command:
cat: /tmp/awc_buf.txt: No such file or directory
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode