Siemens SCALANCE W1750D CLI - Show Ap Client-Match-Triggers

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
297
4.16.31 show ap client-match-triggers
Description
This command displays the configuration conditions that trigger client match events and
actions for the clients associated with an AP.
Syntax
show ap client-match-triggers
Usage Guidelines
Use this command to view the clients match trigger records. When the client match feature is
enabled on an AP, the AP measures the RF health of its associated clients. Based on the
following trigger conditions, the clients are moved from one AP to another for better
performance and client experience.
● Dynamic Load Balancing:
● Sticky Clients
● Band Steering
● Channel Utilization
● Client Capability Match
For more information on client match and client match trigger conditions, see
onfiguration
Manual “SCALANCE W UI”.
Example
The following example shows the output of the show ap client-match-triggers command:
Client Match Triggers
---------------------
Station PHY Target_AP
cutil g ccnt RSSI CHAN CCNT ROOM CUTIL
Reason
STA_CAP
rssi
chan
ccnt
------- --- --------- ------
----- ------ ---- ---- ---- ---- -----
-------
---
-------
----
----
----
A_CCNT Time
--- ----
00:15:00:5e:7e:3c 0 9c:1c:12:3a:e9:70
-
- 44 44+ 2 - -
DynamicLoad Balanc-
ing
-
3h:11m:19s
-
25
36+
12
5a:15:00:00:00:16 1 9c:1c:12:3a:e9:1
0
-
- 34 40- - -
-
Stricky Client
-
2h:11m:40s
-
17
6
-
00:15:00:5e:77:c8 0 9c:1c:12:3a:e9:1
0
-
- 38 40- - - -
Dynamic Load Balanc-
ing
-
2h:11m:40s
-
36
48-
19