Siemens SCALANCE W1750D CLI - Aaa Test-Server; A-Ant-Pol

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
31
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.1.5 aaa test-server
Description
This command tests a configured authentication server.
Syntax
aaa test-server <servername> username <username> password <passwd> auth-type <type>
Parameter
Description
<servername>
Authentication server for which the authentication test must be run.
username
<username>
Username to use to test the authentication server.
password <passwd>
Password to use to test the authentication server.
auth-type <type>
Authentication protocol type. Use PAP as the authentication type.
Usage Guidelines
This command verifies the status of RADIUS authentication between the AP and RADIUS or
AAA server.
Example
The following example shows the output of the aaa test-server command:
Authentication is successful
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.1.6 a-ant-pol
Description
This command configures the antenna polarization value for 5 GHz radio channels.