Siemens SCALANCE W1750D CLI - Show Dpi-Stats

CLI Commands
4.16 S
SCALANCE W1750D CLI
490 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.127 show dpi-stats
Description
This command displays the DPI statistics.
Syntax
show dpi-stats
app [id <app> [deny] [full] |user ip <ipaddr> [deny] [full] | [ssid <ssid-name]
full | deny [full] | full]
appcategory [id <appcat> [deny] [full] |user ip <ipaddr> [deny] [full] | [ssid
<ssid-name] full | deny [full] | full]
session [full]
webcategory [id <web> [deny] [full] |user ip <ipaddr> [deny] [full] | [ssid <ssid-
name] full | deny [full] | full]
webreputation [id <rep> [deny] [full] |user ip <ipaddr> [deny] [full] | [ssid
<ssid-name] full | deny [full] | full]
Command/Parameter
Description
app
Displays application statistics.
appcategory
Displays the DPI statistics for application category.
session
Displays datapath session details for DPI.
webcategory
Displays the DPI statistics for web category.
webreputation
Displays the DPI statistics for web reputation score.
ssid
Displays the DPI statistics for the last 15 minutes from each AP connected
to the SSID in the network.
ssid name
Displays DPI statistics for the last 15 minutes for the specified SSID.
id
Displays DPI statistics for the specified application, application category,
web category or web reputation ID.
user ip <ip-addr>
Displays DPI statistics for specified user IP address.
full
Displays the complete DPI statistics for the application, application category,
session, web category, and web reputation stored on the AP since the last
15 minutes.
deny
Displays the blocked URLs and web content related traffic.