Siemens SCALANCE W1750D CLI - Clear Airgroup State Statistics; Clear-Dhcpoption82

CLI Commands
4.3 C
SCALANCE W1750D CLI
70 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.3.5 clear airgroup state statistics
Description
This command removes the AirGroup statistics.
Syntax
clear airgroup state statistics
Usage Guidelines
Use this command to remove AirGroup details from the AP database.
Example
The following command clears AirGroup statistics:
(scalance)(config)# clear airgroup state statistics
Command Information
AP Platform
Command Mode
All platforms
Configruation Mode
4.3.6 clear-dhcpoption82
Description
This command is used to delete the DHCP option 82 XML file from the AP. This command
must be executed only from the master AP. Further, this will be allowed only if the XML file is
disabled from the configure terminal.