Siemens SCALANCE W1750D CLI - Mgmt-User

CLI Commands
4.11 M
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
205
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.11.11 mgmt-user
Description
This command configures user credentials for access to the Virtual Controller Management
UI.
Syntax
mgmt-user <username> [<password>][<type>]
no..
Parameter
Description
mgmt-user
Configures administrator credentials.
<username>
Creates a User name for the administrator user.
<password>
Creates a password for the administrator user.
<type>
Indicates the type of the user. For example, users with read-only privilege
or the guest management user.
no..
Removes the configuration.
Usage Guidelines
Use this command to configure administrator credentials to access and configure the AP.
Example
The following example configures administrator login credentials for the AP management
interface:
(scalance)(config)# mgmt-user User1 Password123 guest-mgmt
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode