Siemens SCALANCE W1750D CLI - Show Ap Flash-Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
370 Function Manual, 03/2019, C79000-G8976-C452-04
Usage Guidelines
Use this command to view neighbors of the 802.11k clients connected to an AP.
Example
Radio: 0
Nbr count: 3
11k Neighbours
--------------
BSSID
-----
Channel
------
Last Update
-------
6c:f3:7f:b6:62:f0
6c:f3:7f:b6:69:30
6c:f3:7f:b6:66:30
292
816
808
1s
6s
5s
Radio: 1
Nbr count: 3
11k Neighbours
--------------
BSSID
-----
Channel
------
Last Update
-----------
6c:f3:7f:b6:62:e0
6c:f3:7f:b6:66:20
6c:f3:7f:b6:69:20
1
6
6
13s
33s
33s
The output of this command displays information on the number of 802.11k neighbors on
each radio of the AP.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.77 show ap flash-config
Description
This command shows the statistics of the AP configuration stored in flash memory.
Syntax
show ap flash-config
Usage Guidelines
Use this command to view the configuration details in the flash memory.
Example
The following example shows the output of show ap flash-config command: