Siemens SCALANCE W1750D CLI - Show Syslog-Level

CLI Commands
4.16 S
SCALANCE W1750D CLI
590 Function Manual, 03/2019, C79000-G8976-C452-04
4.16.210 show syslog-level
Description
This command displays the Syslog logging levels configured for an AP.
Syntax
show syslog-level
Usage Guidelines
Use this command to view the Syslog logging facilities and the associated logging level.
Example
The following example shows to output of the show syslog-level command:
Logging Level
-------------
Facility Level
-------- -----
ap-debug debug
network debug
security debug
system debug
user debug
user-debug debug
wireless debug
The output of this command provides the following information:
Parameter
Description
Facility
Displays the list of logging facilities configured on the AP.
ap-debug
Generates a log for the AP device for debugging purposes.
network
Generates a log when there is a change in the network, for example, when a new
AP is added to a network.
security
Generates a log for network security, for example, when a client connects using
wrong password.
system
Generates a log about the system configuration and status.
user
Generates a log for the AP clients.
user-debug
Generates a detailed log about the clients for debugging purposes.