Siemens SCALANCE W1750D CLI - Show Radio Profile

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
561
Parameter
Description
Background Spectrum Monitor
Indicates background spectrum monitoring is enabled.
When enabled, the APs in access mode continue with
normal access service to clients, while performing addi-
tional function of monitoring RF interference (from both
neighboring APs and non Wi-Fi sources such as, mi-
crowaves and cordless phones) on the channel they are
currently serving clients.
Standalone Spectrum
Indicates the portion of the channel (upper, middle, or
lower) that is being monitored on the 5 GHz band.
Cell Size Reduction
Indicates the Rx sensitivity values configured on the 2.4
GHz and 5.0 GHz radio profiles.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.192 show radio profile
Description
This command displays the 2.4 GHz and 5 GHz radio profile details for an AP.
Syntax
show radio profile [<profile_name>]
Usage Guidelines
Use this command to view the 2.4 GHz and 5 GHz radio profile details for an AP. Details of
the configured radio profile can be viewed. However, details of the default radio profile
cannot be viewed.
Example
The following example shows the output of show radio profile command:
(scalance)# show radio profile
2.4G Radio profile
------------------
Name Legacy Mode Single Chain Legacy Beacon Interval 802.11d/802.11h Interference
Immunity Level CSA Count MAX Distance Channel Reuse Type Channel Reuse Threshold
Spectrum