Siemens SCALANCE W1750D CLI - Page 560

CLI Commands
4.16 S
SCALANCE W1750D CLI
560 Function Manual, 03/2019, C79000-G8976-C452-04
Channel Reuse Type:disable
Channel Reuse Threshold:0
Background Spectrum Monitor:disable
Cell Size Reduction:0
5.0 GHz:
Legacy Mode:enable
Beacon Interval:100
802.11d/802.11h:enable
Interference Immunity Level:2
Channel Switch Announcement Count:2
MAX Distance:600
Channel Reuse Type:disable
Channel Reuse Threshold:0
Background Spectrum Monitor:disable
Standalone Spectrum Band:5ghz-upper
Cell Size Reduction:0
The output of this command provides the following information:
Parameter
Description
Legacy Mode
Indicates if the legacy mode is enabled on the APs to
run the radio in the non-802.11n mode.
Beacon Interval
Displays beacon interval for the AP in milliseconds.
When beacon interval is configured, the 802.11 beacon
management frames are transmitted by the access
point at the specified interval.
802.11d/802.11h
Displays if the AP is allowed advertise its 802.11d
(country information) and 802.11h capabilities.
Interference Immunity Level
Displays the immunity level configured for anAP radio
profile to improve performance in high-interference
environments. For more information on configuring
immunity levels, see rf dot11a-radio-profile and rf
dot11g-radio- profile.
Channel Switch Announcement Count
Displays the number of channel switching announce-
ments that are sent before switching to a new channel.
MAX distance
Indicates the maximum distance in meters between a
client and an AP or between a mesh point and a mesh
portal.
Channel Reuse Type
Indicates if channel reuse type is enabled.
Channel Reuse Threshold
Displays the channel reuse threshold configured for
channel reuse type.