Siemens SCALANCE W1750D CLI - Show Out-Of-Service

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
553
Example
The following example shows the output of show opendns command:
OpenDNS Account :admin
OpenDNS Password :admin123
OpenDNS Status :Not connected
OpenDNS Error Message:N/A
The output of this command includes the following parameters:
Column
Description
OpenDNS Account
Indicates the username for the OpenDNS account.
OpenDNS Password
Indicates the password for the OpenDNS account
OpenDNS Status
Indicates if the AP is connected to the OpenDNS server
OpenDNS Error Message
Displays OpenDNS error message.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.186 show out-of-service
Description
This command displays the details of the out of service operations triggered on the AP.
Syntax
show out-of-service
Usage Guidelines
Use this command to view the out-of-service operations and the SSID availability based on
the out-of-service states detected on the AP.
Example
The following example shows the output of the show out-of-service command:
Out of service trigger Status