Siemens SCALANCE W1750D CLI - Alg

CLI Commands
4.1 A
SCALANCE W1750D CLI
40 Function Manual, 03/2019, C79000-G8976-C452-04
(scalance)(config)# ale-server AleServer1
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.1.14 alg
Description
This command allows you to modify the configuration settings for ALG protocols enabled on
an AP. An application-level gateway consists of a security component that augments a
firewall or NAT used in a network.
Syntax
alg
sccp-disable
sip-disable
vocera-disable
no…
Com-
mand/Parameter
Description
Default
sccp-disable
Disables the SCCP.
Enabled
sip-disable
Disables the SIP for VOIP and other text and multimedia sessions.
Enabled
vocera-disable
Disables the VOCERA protocol. Enabled
no…
Removes the specified configuration parameter.
—
Usage Guidelines
Use this command to functions such as SIP, Vocera, and Cisco Skinny protocols for ALG.
Example
The following example configures the ALG protocols:
(scalance)(config)# alg
(scalance)(ALG)# sccp-disable
(scalance)(ALG)# no sip-disable
(scalance)(ALG)# no vocera-disable