Siemens SCALANCE W1750D CLI - Telnet; Telnet-Server

CLI Commands
4.17 T
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
633
4.17 T
4.17.1 telnet
Description
This command initiates a telnet session with external servers from the SCALANCE W CLI.
Syntax
telnet <host> telnet-port <port>
Command/Parameter
Description
host
The IP address of the destination server.
<telnet-port>
The physical port number of the server to which a connection needs to be
established through Telnet.
Usage Guidelines
Use this command to Telnet an external server using the SCALANCE W CLI.
Example
The following example initiates a telnet session with external servers:
(scalance) telnet 10.0.0.1 23
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.17.2 telnet-server
Description
This command enables Telnet access to SCALANCE W CLI.
Syntax
telnet-server