Siemens SCALANCE W1750D CLI - Wlan Sta-Profile

CLI Commands
4.20 W
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
717
(scalance)(wired ap profile"guestWired1")# auth-server server1
(scalance)(wired ap profile"guestWired1")# server-load-balancing
(scalance)(wired ap profile"guestWired1")# access-rule-name wiredACL
(scalance)(wired ap profile"guestWired1")# set-role Group-Name contains wired wired-
instant
(scalance)(wired ap profile"guestWired1")# set-vlan ap-name equals test 200
(scalance)(wired ap profile"guestWired1")# trusted
(scalance)(wired ap profile"guestWired1")# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and Wired port profile con-
figuration sub- mode.
4.20.15 wlan sta-profile
Description
This command enables Wi-Fi uplink on an AP.
Syntax
wlan sta-profile
essid <ESSID>
cipher-suite <cipher-suite-string>
wpa-passphrase <WPA-key>
uplink-band <band>
no…
no wlan sta-profile
Command/Parameter
Description
wlan sta-profile
Configures a Wi-Fi uplink profile for an AP.
essid<ESSID>
Defines a unique name for the network on which the Wi-Fi
uplink will be enabled.