CLI Commands
4.20 W
SCALANCE W1750D CLI
716 Function Manual, 03/2019, C79000-G8976-C452-04
(scalance)(wired ap profile"employeeWired1")# uplink-enable
(scalance)(wired ap profile"employeeWired1")# called-station-id type 10.64.1.23
(scalance)(wired ap profile"employeeWired1")# content-filtering
(scalance)(wired ap profile"employeeWired1")# switchport-mode trunk
(scalance)(wired ap profile"employeeWired1")# allowed-vlan 2,3,5
(scalance)(wired ap profile"employeeWired1")# native-vlan 1
(scalance)(wired ap profile"employeeWired1")# mac-authentication
(scalance)(wired ap profile"employeeWired1")# dot1x
(scalance)(wired ap profile"employeeWired1")# use-ip-for-calling-station
(scalance)(wired ap profile"employeeWired1")# l2-auth-failthrough
(scalance)(wired ap profile"employeeWired1")# auth-server server1
(scalance)(wired ap profile"employeeWired1")# server-load-balancing
(scalance)(wired ap profile"employeeWired1")# radius-reauth-interval 20
(scalance)(wired ap profile"employeeWired1")# access-rule-name wiredACL
(scalance)(wired ap profile"employeeWired1")# set-role Group-Name contains wired
wired- instant
(scalance)(wired ap profile"employeeWired1")# set-vlan ap-name equals test 400
(scalance)(wired ap profile"employeeWired1")# trusted
(scalance)(wired ap profile"employeeWired1")# end
(scalance)# commit apply
The following example configures a guest wired profile:
(scalance)(config)# wired-port-profile guestWired1
(scalance)(wired ap profile"guestWired1")# type guest
(scalance)(wired ap profile"guestWired1")# speed auto
(scalance)(wired ap profile"guestWired1")# dot3bz
(scalance)(wired ap profile"guestWired1")# duplex auto
(scalance)(wired ap profile"guestWired1")# no shutdown
(scalance)(wired ap profile"guestWired1")# poe
(scalance)(wired ap profile"guestWired1")# uplink-enable
(scalance)(wired ap profile"guestWired1")# content-filtering
(scalance)(wired ap profile"guestWired1")# switchport-mode trunk
(scalance)(wired ap profile"guestWired1")# allowed-vlan 200,201,400
(scalance)(wired ap profile"guestWired1")# native-vlan 1
(scalance)(wired ap profile"guestWired1")# captive-portal external exclude-uplink
Ethernet
(scalance)(wired ap profile"guestWired1")# mac-authentication
To Next Page