Siemens SCALANCE W1750D CLI - Show Rlts-Tags; Show Running-Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
569
4.16.198 show rlts-tags
Description
This command displays list of RTLS tags associated with the AP.
Syntax
show rtls-tags
Usage Guidelines
Use this command to view the RTLS tags list.
Example
The following example shows the output of the show rtls-tags command:
RTLS Device Table [Tags]
-------------------------
MAC RSSI BSSID Batt(%) Data Rate TX Power Channel Vendor ID Last Update
--- ---- --- ----- ------- --------- -------- ------- --------- ---- -------
00:0c:cc:55:73:8e -10 a8:bd:27:18:49:c0 0 10 0 6 0 10s
00:0c:cc:02:b4:eb -30 a8:bd:27:18:49:c0 0 10 0 6 0 107s
00:0c:cc:55:73:7c -41 a8:bd:27:18:49:c0 0 10 0 6 0 213s
Total devices:3
-------------------------------
Report Tag : Off
Report Interval : 60
Debug Logs : On
Last Send Time : 2018-04-13 15:32:21
Tags Chirps : 8223
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.199 show running-config
Description
This command displays the current configuration running on an AP, including the current
changes that are yet to be saved.